[Warfork 40.000 - Rogue Rules]¶
Imperial Flush Space Marines¶

With the Orks nearly finished, I prepared their opponents, by doing all the airbrush steps on them today. The opponents are of course the classical ones, Space Marines. I choose the Knight models from Alternative Armies for them, the Chapter is named "Imperial Flush" (which will more sense when you see their iconography) - a non-codex chapter as you can see from their organisation in the pictures below.

As with the Orks, I bought these models quite some while ago, in November 2011. They are ready build (well, except one flag pole which I forgot to build) since January 2012. They are as they came, except that all the leader models were equipped with Mechanical Hammers from MaxMini.eu and I added flag poles to the leaders from plastic rod.

When painting them, I roughly followed "How to paint Blood Ravens Space Marine" by Lester Bursley as published on his YouTube channel "Awesome Paint Job". For colours I used:

After a basecoat of the surface primer, the models were sprayed black (forming the deepest shadows), then from a 90° angle with Mahagony in downward strokes, then with half Mahagony/half Carmine from about a 45° angle and finally with Carmine from the top and in selected spots (like shoe tips, extended hips, etc).

Then the models were sprayed in gloss varnish.

Now the brush work can begin.


[Modern]¶
Private Military Contractors¶

The contractors are finished. I forgot to take some WIP pictures, so here is only the result.

I painted the camo in ACU, Woodland BDU, Flecktarn and DPM; mixing the schemes wildly on the miniatures.

Ready for the first contract.


[SiFi]¶
Armed Civilians¶

The models were basecoated with Vallejo primer applied by airbrush (photographed together with the Free Traders).


[SiFi]¶
Free Trader Crew¶

The models were basecoated together with the Space Pirates (photographed with them). The mule was also basecoated, then sprayed black from below, then sprayed yellow all around.


[Modern]¶
Private Military Contractors¶

The models received a basecoat with Vallejo primer, then were sprayed black.


[SiFi]¶
More Vehicles¶

The models were treated first with a Vallejo basecoat from the airbrursh.

The ground vehicles got a black spray coat from underneath

The MedServ VTOL was sprayed light grey all around, then white from above as a first highlight.

The ConServ vehicles were sprayed in flat orange, then highlighted with a bright orange sprayed from above.

TecServ was sprayed grey on the lower half, then blue on the upper half.


[Dreadball]¶
Gaming Board¶

Some lessons learnt. When using a masking material that is itself not transparent, the edge of the masking material should fit somewhere on a visible line on the model (like a row of hexes). With my card mask, it was a bit of guessing if I placed it correctly or not... As you can see, the lines are not always placed neatly...

Apart from that small detail, the process worked well. The salt was a bit of a hindrance, as the underground was not flat, and four hands were very helpful (thanks to my wife).

Next, the salt will be removed; the Dreadball league symbols, the entry point arrows and the referree starting field checkers need to be painted. Also the lines of the hexfields and the numbers on the counters need to be painted.


[Dreadball]¶
Gaming Board¶

Okay, time to get some colours onto the board. The following were used:

First step was, to spray the metal colour.

The main areas of the board were then sprayed green grey.

The team areas, the score counter, the scoring areas and the turn counter were painted in red and blue, one colour for each team.

At this point I decided, that I wanted to break up the hexfield optic of the field. The scoring area was the first part where I applied this. From card I made a mask, and used it to show the scoring areas as a rectangular area.

The 'side add on' tiles were also given a straight edge in the field colour.

The board in its current stage.

When I looked at it, I decided that the playing area needs some lines to give it more structure and further 'de-hex' it.

As a preparation step I cut two more masks from card.

I hope to be able to use them tomorrow.


[Dreadball]¶
Gaming Board¶

With all the teams painted, the board is still missing some paint. Time to change that.

First, all pieces received a basecoat of black from my airbrush.

The second coat was of Vallejo Model Air Rust.

In preparation for the salt step, all pieces received a coat of gloss vanish.


[SiFi]¶
Colonists and Vehicles¶

I basecoated all the models with Vallejo Surface Primer White.

The vehicles were then sprayed black from underneath.

The smaller trucks,which belong to the technical services group, were airbrushed Vallejo Basalt Grey on the lower half.

Masking the lower half with a piece of card at the height of the mud guard, I sprayed the upper half Vallejo London Blue.

The next steps will be brushwork.

The other two trucks, from the construction services group, will be orange. I started with a basecoat of Vallejo German Orange through my airbrush, a very flat orange.

As a second step, I airbrushed Vallejo Red Orange as a highlight colour.

Again, the next steps will be brushwork.

I also sprayed the carriage with a coat of Vallejo Air Colour Rust on all four trucks, but forgot to take a picture of that.