2 0 1 8 - 0 1 - 1 5
[Song of Fork and Heroes]¶
Mythical Agyptian Terrain Mat¶
I used the same flock I already applied to the miniature's bases, basecoating with the dark one and sprinkling on highlights with the light one.
The mat after the flocking:
I then used the bottom of the board as a guide for cutting the mat. This meant that the parts folded over the sides remained. Those I painted with the base ochre brown, which gives me a nice frame.
Here is the mat with some terrain on and my Agyptians scouring the area for Richards pesky Greeks.
Here is the mat rolled up.
Published 2018-01-15 10:38:22
28mm | Agyptians | Song of Fork and Heroes | Terrain
All posts for this project: newest first | oldest first.
2 0 1 8 - 0 1 - 1 0
[Song of Fork and Heroes]¶
Mythical Agyptian Terrain Mat¶
A second coat gave a much better coverage.
I then used the same sand colour as for the obelisks and statues.
Then the whole board got a drybrush of white.
Published 2018-01-10 11:07:09
28mm | Agyptians | Song of Fork and Heroes | Terrain
All posts for this project: newest first | oldest first.
2 0 1 7 - 1 2 - 3 1
[Song of Fork and Heroes]¶
Mythical Agyptian Terrain Mat¶
This is how the mat looked after a second layer of acrylic. It took me about 1.5 tubes.
I then applied thinned PVA glue (1:1) and sprinkled on two grains of sand. Here is the first learning: When applying white PVA onto a white surface, tint it with something. I went with the reflection of light, and thought I got everything coated - when I tapped off the excess sand, there were some quite visible spare patches. I touched them up, but they are visible now as they are a bit higher than the rest...
After sealing the sand in with watered down PVA (1:6 + washing-up liquid) and letting this coat dry thoroughly, I stippled on a first coat of paint.
Published 2017-12-31 05:54:15
28mm | Agyptians | Song of Fork and Heroes | Terrain
All posts for this project: newest first | oldest first.
2 0 1 7 - 1 2 - 2 8
[Song of Fork and Heroes]¶
Mythical Agyptian Terrain Mat¶
With the miniatures done and some terrain under way, I need a gaming table. What I wanted to do for quite some time is a flexible gaming mat.
I watched plenty of YouTube videaos on the topic, but the recently published video by the Terrain Tutor was the tip on the dare to give it a try.
Here are the components:
As fabric, I use painter fleece, the one I choose has a bottom of plastic sheeting, which should help keeping the acrylic and the colour on the fleece.
I pinned the fleece to the board with pins.
Then added one thin layer of acrylic.
Published 2017-12-28 11:13:16
28mm | Agyptians | Song of Fork and Heroes | Terrain
All posts for this project: newest first | oldest first.