2 0 1 5 - 0 7 - 0 4

[15mm IABSM]¶
North of Caen¶

The stones are all painted and drybrushed. After this step, I went over the models again with Black and British Uniform to cover all the errors I did so far (mainly on the boots and lower legs due to the drybrushing of the bases), and repainted the helmets in Russian Uniform where the colour started to peel off.

As the peeling started, I now gave the models a coat of gloss varnish, to seal the current state. Especially the helmets, where I picked the models up mainly for doing all the bases, should be safe from chipping now.

Also, the gloss varnish will help the washes which are to follow to flow more easily.

Published 2015-07-04 10:55:33

All posts for this project: newest first | oldest first.

[Warfork 40,000 - Rogue Confrontation]¶
Trazior Underhive¶

The wall sections are cleared of flash...

as well as the tower levels.

Published 2015-07-04 10:46:55

28mm | Terrain | Trazior Underhive | Warfork 40,000 - Rogue Confrontation

All posts for this project: newest first | oldest first.

2 0 1 5 - 0 6 - 2 8

[15mm IABSM]¶
North of Caen¶

I highlighted the bases in my usual two drybrushs. The first

does not really change the colour (only slightly), but dampens the brightness of the basecoat.

Here the second drybrush

where you can also see the first individual stones painted.

Published 2015-06-28 09:58:53

All posts for this project: newest first | oldest first.

2 0 1 5 - 0 6 - 2 5

[15mm IABSM]¶
North of Caen¶

I painted all the bases in the usual brown of my base style, paying extra attention to not get paint on the boots or the uniform of kneeling/prone models.

Published 2015-06-25 10:19:51

All posts for this project: newest first | oldest first.

2 0 1 5 - 0 6 - 2 2

[Warfork 40,000 - Rogue Confrontation]¶
Trazior Underhive¶

The girders supports were all deflashed, which took forever. The outsides were quickly done, but all the insides... When I was finally done I glued them together. I used Lego blocks and an additional baseplate loosely fitted on top to get them straight.

The top row are the ones where I cut the pins in half, the lower row are with uncut pins. I am missing one girder, probably still in the big box...

The support beams were just a matter of minutes to remove the flash.

I now started with the wall section, which are quite quick compared to the girders, as there are only 4 smooth sides to deflash.

Published 2015-06-22 09:27:32

28mm | Terrain | Trazior Underhive | Warfork 40,000 - Rogue Confrontation

All posts for this project: newest first | oldest first.

2 0 1 5 - 0 6 - 1 7

[15mm IABSM]¶
North of Caen¶

I settled for 70.892 Yellow Olive for the support weapons, grenades, binoculars, etc.

The skin was painted 70.815 Basic Skintone.

Published 2015-06-17 10:42:05

All posts for this project: newest first | oldest first.

2 0 1 5 - 0 6 - 1 3

[Warfork 40,000 - Rogue Confrontation]¶
Trazior Underhive¶

I am quite far with my rules medley "Warfork 40,000 - Rogue Confrontation", a mix of the original Confrontation rules as published in White Dwarf, Stargrunt II (main mechanics), Necromunda (mainly the campaign stuff) and Rogue Trader 40,000. Far enough, that the first play test can happen soon - only over which terrain?

Time to use the plastics from the Maki Games Kickstarter to create parts of Trazior Underhive.

I sorted all the parts and started to remove the flash from the support beams.

The whole first batch.

The pins fill the complete height of the base plates. I can imagine layouts with walkways on the second story, where I would need to stack two support beam pieces - which would not be possible (see next picture). So I decided to cut the pins down to just below half length. This will lessen their hold, but allow stacking.

Top shows the original length pins, which are not stackable; the bottom shows the cut pins which stack nicely.

All the work done today. The pile in the lower right is the cut off plastic.

Published 2015-06-13 09:53:22

28mm | Terrain | Trazior Underhive | Warfork 40,000 - Rogue Confrontation

All posts for this project: newest first | oldest first.

2 0 1 5 - 0 6 - 1 1

[15mm IABSM]¶
North of Caen¶

All weapons except the support weapons are painted:

Weapon Metal
- 70.863 Gunmetal Grey
  
  &
  
  70.995 German Grey
Weapon Wood
- 70.826 German Camo Medium Brown

The support weapons (PIATs and mortars) as well as all the equipment like grenades, binoculars, radios etc. will be painted green. Searching for the right shade of green I camo across a multitude of descriptions, the colour also seems to has changed during the War. Adding to that the usual wear and tear, bleaching from the sun, field repairs with non-regulation paint etc., I figured any deepish-olivish-greenish shade will do.

I painted 4 testmodels, probably I will take on of the two shades of green on the right.

Published 2015-06-11 11:35:07

All posts for this project: newest first | oldest first.

2 0 1 5 - 0 6 - 1 0

[Modern]¶
Characters¶

Peter

Last but not least, the smallest of the characters is done. Peter is only small, but really vicious with his crowbar, especially when he is angry!

Hair
- 70.910 Orange Red
- SWW021 Red Black
- 70.910 Orange Red
- 70.910 Orange Red
  
  &
  
  70.951 White
Skin
- 70.815 Basic Skintone
- SWW030 Golden Brown
- 70.815 Basic Skintone
- 70.815 Basic Skintone
  
  &
  
  70.951 White
Crowbar
- 70.302 Dark Rust stippled
- 70.301 Light Rust stippled
- 70.303 Yellowish Rust stippled
- 71.063 Silver
Shirt, yellow part
- 70.952 Lemon Yellow
- SWW030 Golden Brown
Shirt, red part
- 70.947 Red
- SWW021 Red Black
Belt
- 72.028 Dark Green
Trousers
- 70.844 Deep Sky Blue
- SWW015 Blue
Trousers, stripes
- 70.947 Red
- SWW021 Red Black
Socks
- 70.951 White
- SWW030 Golden Brown
Shoes
- 72.028 Dark Green
Shoe Sole
- 70.951 White
- SWW001 Soft Body Black