[15mm]¶
Corporate Marines¶

Thanks to Tobias I have my prototpye. It fits well onto he model :-)

With the basic form confirmed, I added some more details. On the front wall I added a bench with 5 seats. This will be quite cramped, but this is a military vehicle after all and no luxury plane.

On the rear side I added a seat for the gunner, and two racks with spare ammo drums for the machine gun.

This is the final version now that I will use with the landers.


[15mm]¶
Corporate Marines¶

Finally some progress. I roughly recreated the machine gun from Brigade Models in OpenSCAD, and added in the rear wall an opening for the gunner. The machine gun will be mounted on the contraption I added there.

Time for a test print.


[15mm IABSM]¶
North of Caen¶

With the Wehrmacht done, I started to work on the British troops. First, I painted the boots on all miniatures black. Next, I highlighted the uniforms with 'British Uniform'. This is the same colour I airbrushed over the black basecoat, but brushed on it is much more intensive. On the below picture, the left model is the highlighted one, the right a model with only the brown airbrushed on.

The following is my test model, with all the different colours painted, but no highlights yet except for the uniform as described above. I am happy with the colour selection, and will proceed like this with all the models.


[15mm IABSM]¶
South of Cherbourg¶

As the last things left to be painted were mortar ammo crates and shells.

I was not able to find any dedicated mortar shells for the Wehrmacht mortars, so I settled for the pack '14. Medium mortars+ ammo boxes' from Peter Pig's AK47/Weapons range. When I ordered them I asked for packs consisting only of the ammo crates but no mortars. Friendly as they are, Peter Pig complied :-)


[15mm IABSM]¶
South of Cherbourgh¶

Finally, the miniatures are all done, all washes and highglights applied. All the new miniatures I prepared for painting (see previous posts) got me motivated again to finish this rather long journey.

Here are some close ups (mobile quality close ups only...):

Here are the squads in formation. I do not know what I was thinking when planning the force, but I ended up with one squad more than I would need... The group of models above the ones in black bases (spare command models) are the additional machine gunners which allow me to equip each squad with two MG42, thus making them Grenadiers.

All the models I painted glued to wood strips (support weapons and the Big Men), have been cut from the wood strips and glued on their washers. Then I applied a mix of my base brown and floor screed, a kind of self-leveling plaster of paris. On top of that I sprinkled sand.

Unfortunately I ran out of the brown colour...

Next up is drybrushing the bases, painting some individual sand grains as rocks and adding static grass. But first I need a resupply of the brown.


[15mm IABSM]¶
South of Cherbourg¶

The reinforcements are at the same stage as the previous models.

They currently have their gloss varnish coat drying. After that, the whole bunch will have washes applied.


[15mm IABSM]¶
South of Cherbourgh¶

This week I managed to get in some painting time on 3 of 5 evenings as well as some hours today. The result of this is that only the webbing, rifle straps and helmets are missing.


[15mm IABSM]¶
South of Cherbourgh¶

Some progress on the Wehrmacht: The models got a basecoat with black with "VA74602 Vallejo Primer Black Acrylic-Polyurethane" applied through my Airbrush, followed by German Fieldgrey WWII. I then drybrushed the models in lightened up Fieldgrey.

Next I painted the Zeltbahnen, both the rolled up and worn as a poncho types.

Reinforcements top left area.

Reinforcements basecoated in Fieldgrey.

Highlighted Fieldgrey and Zeltbahnen painted.


[15mm IABSM]¶
North of Caen¶

The British got completely based, basecoated in "VA74602 Vallejo Primer Black Acrylic-Polyurethane" with my Airbrush, and then sprayed from slightly above angles to create the first shading with 70.921 English Uniform from Vallejo.


[15mm IABSM]¶
South of Cherbourg¶

The US Army models got basecoated in black with "VA74602 Vallejo Primer Black Acrylic-Polyurethane" applied through my Airbrush.

The bare metal models I de-flashed and (temporarily based) two days later, being part of the reinforcements I orderd from Peter Pig.