[Warfork 40.000 - Rogue Rules]¶
Imperial Flush Space Marines¶

After only three month, the next fire team is done.

At this rate it will only take me another year for the whole force...

Published 2014-11-08 10:49:00

28mm | Airbrush | Alternative Armies | Imperial Flush Chapter | MaxMinis.eu | SiFi | Space Marines | Warfork 40.000 - Rogue Rules

All posts for this project: newest first | oldest first.

Back to Top

[15mm]¶
Corporate Marines¶

Having seen a news item on The Miniatures Page, I thought these would fit perfectly well for the door gunners of my VTOLs. So I ordered the gatlings and machine guns from Brigade Models:

Now I need to recreate them as 3 models in OpenSCAD and play around with them on my cabin model.

Published 2014-08-30 22:16:00

15mm | Brigade Models | OpenSCAD | SiFi

All posts for this project: newest first | oldest first.

Back to Top

[6mm]¶
A gaming board in a weekend¶

The buildings were finished by painting the windows Extra Dark Green and the doors and hatches in German Grey.

The smaller hill I cut into two:

I also removed one arm from the river:

To finish the hills, I added static grass:

It is now 11:43 pm and the board is ready for gaming (well, except the varnish drying on the hills and buildings):

Mission accomplished :-)

One gaming board done in one weekend, and that although we played BattleTech yesterday and had visitors with us today.

Published 2014-08-10 23:43:00

6mm | SiFi | Space Marines | Stargrunt 40.000 - Rogue Rules | Terrain

All posts for this project: newest first | oldest first.

Back to Top

[6mm]¶
A gaming board in a weekend¶

I cut the felt and placed it on the board together with the other pieces. The island in the river was cut out of a whim.

I still need to add some static grass and paint the windows, doors and hatches of the buildings.

The smaller hill is too big, it does not allow the Orks to advance on the Imperial position from behind it too much - and over it puts them in the line of fire. I think I will cut it in half, allowing more manoevering space behind it.

I am also not sure yet if I will leave the river with the island... at the moment, having to cross two arms is slowing them Orks down further... Either I will cut the left one away or I need to paint more items on the Orks red... because Woz red wunz go fasta!

Published 2014-08-10 20:04:00

6mm | SiFi | Space Marines | Stargrunt 40.000 - Rogue Rules | Terrain

All posts for this project: newest first | oldest first.

Back to Top

[6mm]¶
A gaming board in a weekend¶

The buildings were base coated in grey, then the lower half was sprayed white in preparation of the yellow coat that followed. After the yellow was dry, I placed a 1mm tape strip around the building, and then sprayed a dark brown coat over it. This was then covered by a 2mm tape strip, placed (theoretically) centrally on the 1mm strip. Then the building was sprayed in a sand colour, and received two drybrushs.

Then it was time to remove the tape strips... drumroll...

Well, the two buildings on the left turned out as intended, with the two buildings on the left I did not place the strips correctly... :-(

The board was drybrushed in the base colour, then in sand and finally in white.

The hills were painted in anthracite grey, then drybrushed in a brown grey and finally in white. The sand areas were painted the same way as the board.

Published 2014-08-10 16:49:00

6mm | Airbrush | SiFi | Space Marines | Stargrunt 40.000 - Rogue Rules | Terrain

All posts for this project: newest first | oldest first.

Back to Top

[6mm]¶
A gaming board in a weekend¶

The board received a wash of dark brown, then green in patches.

The hill the Marines need to defend is occupied by 4 buildings the Squats need to blow up. I placed them in a way, that the engineers can move from building to building by using two actions, so one whole turn. They can also chance however, making a combat move (rolling 2D4) and hope to cover the distance in one action, leaving them one action to start preparing the charges.

The hills all consist of three layers of cork floor tiles glued together. I then used pliers to break of the edges, thus creating a rough and uneven cliff face.

Finally, the hills got some areas coverd in sand as well. On the large hill, the sand forms right angles around at least one corner of each building, so that I know exactly where to place them for each game.

Published 2014-08-10 12:08:00

6mm | SiFi | Space Marines | Stargrunt 40.000 - Rogue Rules | Terrain

All posts for this project: newest first | oldest first.

Back to Top

[6mm]¶
A gaming board in a weekend¶

I painted these models quite some time ago, but so far never used them in a game.

Now a new colleague who learnt about my hobby asked for a game during lunch break, so I thought again of these small models, which would need a smaller game board.

Only problem: I neither have a board nor any terrain...

The above models I painted according to the scenario description of Ork Hill. So it will be this scenario I have time to build terrain for this weekend... You grow with your challenges...

Here you can see my interpretation of the terrain description from the scenario:

So I need two hills, four buildings and the board. The woods will be brown felt areas with aquarium plants I already have (probably too large, but ready) and for the river/marsh I will use blue felt. So I hope the building and painting can be accomplished this weekend.

First, the board. It is 50751.2cm MDF. It got coated with PVA and sprinkled with bird cage sand. I then painted it in orange brown.

The buildings I designed on the computer, printed them and glued the prints to corrugated card board. I the cut the windows before cutting the walls. For gluing, I used Lego blocks to get nice 90° corners. There is a floor, inner walls that close the windows from the inside and serve as pillars for the roof and finally the roof. As I don't like 'unlogical' terrain, I needed an access to the roof. So I cut squares from card board, cut away the edges and glued them onto the roof as hatches. When dry, I covered the buildings in ready made wall spackle.

Published 2014-08-09 00:22:00

6mm | Games Workshop | Ground Zero Games | Orks | SiFi | Space Marines | Stargrunt 40.000 - Rogue Rules | Terrain

All posts for this project: newest first | oldest first.

Back to Top

[Warfork 40.000 - Rogue Rules]¶
Imperial Flush Space Marines¶

After quite some time I finished the second fire team. With this group of models I made up my mind of where to put the blue/white checker pattern I planned from the start.

I updated the first fire team accordingly. I also removed the fire team marking on the helmets, which absolutely did not look good. Need to think of something else...

Published 2014-07-12 23:52:00

28mm | Airbrush | Alternative Armies | Imperial Flush Chapter | MaxMinis.eu | SiFi | Space Marines | Warfork 40.000 - Rogue Rules

All posts for this project: newest first | oldest first.

Back to Top

[15mm]¶
Corporate Marines¶

The landing gear is done, extended to allow ground contact even with a passenger cabin attached. In the pictures you can see the Green Stuff I used to fix the wood sticks in place and give a base on which I added Miliput after it dried to sculpted the final form. Still needs sanding.

This project is now on hold until I finished the design of the cabin and have it 3d printed.

Published 2014-07-08 23:39:00

15mm | Khurasan Miniatures | Old Crow Models | OpenSCAD | SiFi

All posts for this project: newest first | oldest first.

Back to Top

[15mm]¶
Corporate Marines¶

The decision concerning the armament of the Raven has been taken - I just used all the available weaponry :-)

For the lander, I built a very clever and sophisticated contraption to get all the sides equal. I then cut from tooth picks the extensions, inserted into small holes I drilled.

Concerning the cabin, I started to design my own in OpenSCAD, I am not very far until now:

I am toying with the idea of doing side doors instead of rear doors, but let's see how this turns out.

What also irritates me with the landers is the chin gun, which has one relatively big barrel. With the gunship, I see it as a grenade launcher or small howitzer. That VTOL has reapid firing weapons mounted on the side sponsons. But for the landers, having only the chin guns, I wanted some kind of gatling, chain gun, whatever. So I also designed one. Let's see how this will print, especially with the ring near the front I am not sure as it is not supported from underneath, so probably the printer will have a problem with that.

Published 2014-07-06 22:42:00

15mm | Khurasan Miniatures | Old Crow Models | OpenSCAD | SiFi

All posts for this project: newest first | oldest first.

Back to Top